

From Paper Drawings to Digital Quality Inspection
Building Inspection Digitalisation for HAAS, a global CNC machine tool manufacturer
This case study explains how Onix replaced hand-marked paper drawings and manual reports with a tablet-based inspection flow that captures every measurement on the drawing and delivers results to the right department automatically.
- Paper drawings replaced with point-based inspection on iPad
- Measurements entered directly on the technical drawing
- Out-of-tolerance points flagged visually
- Reports compiled automatically
- Results routed to downstream departments instantly
- UI/UX validated with real shop-floor inspectors
- Industry
- Manufacturing
- Location
- USA
- Less inspection time per partFrom 25 to 10 minutes
- ~60%
- Report turnaroundDown from next day
- <5 min
- Inspector adoptionWithin the first month
- 90%
About the project
HAAS is a leading global manufacturer of CNC machine tools.
With production plants across the US, Europe and China, HAAS runs 80+ internal and customer-facing software products and is an official partner of the Haas F1 Team.
Every part that comes off a HAAS production line is checked against its technical drawing before it moves forward. Quality inspectors were doing it by hand — on paper.
The goal was to move the entire inspection flow onto a tablet, without slowing inspectors down or keeping a parallel paper process as a backup.


Business problem
Inspection worked, but it didn't scale. Every reading was written by hand, every report was assembled manually, and quality data stayed trapped on paper.
- 01
Inspection on printed drawings
Inspectors measured each part by hand against large paper or printed PDF technical drawings, marking deviations with a pen.
- 02
Manual transcription of every reading
Every inspection depended on an inspector correctly writing measurements down by hand — a constant source of errors.
- 03
Reports assembled by hand
Results had to be manually compiled into a report before anyone else in the company could see them.
- 04
Slow hand-off to departments
Reports were forwarded on paper to whichever department needed to act, delaying decisions by up to a day.
- 05
No link between deviation and drawing
There was no digital record tying a specific deviation to the exact point on the drawing where it was found.
- 06
Quality data trapped on paper
Time that could be spent inspecting went into paperwork, and quality data stayed offline until someone typed it up.
Still inspecting parts on paper? Let's digitize it.
Solution
Onix built Inspection Digitalisation — a tablet app that moves the entire inspection flow off paper:
- 01
PDF drawings on the tablet
Inspectors open a part's technical drawing as a PDF directly on the iPad — no printing, no paper copies on the shop floor.
- 02
Point-based measurement entry
The inspector taps the exact point on the drawing where a measurement is taken and enters the actual reading right there.
- 03
Visual out-of-tolerance flags
Inspection Digitalisation flags bad measurements on the drawing — just like circling them on paper, but captured digitally and ready to share.
- 04
Automatic report compilation
Once an inspection is complete, results are compiled into a structured report without any manual write-up.
- 05
Automated routing to departments
Reports go straight to the departments that need to act on them, closing the loop that used to depend on forwarded paperwork.
- 06
Design validated on the floor
Working directly with HAAS's business analysts and IT manager, the team sketched the UI/UX, validated it with inspectors and iterated fast — without a lengthy separate design phase.
Business impact
- more inspections per shift
- ~35%
- months to recover the solution cost
- 6–8
- estimated annual value of recovered inspector time
- $120K
Productivity
- Average inspection time per part reduced from 25 to 10 minutes — a ~60% reduction
- 15 minutes of manual report-writing eliminated per inspection
- Inspectors complete ~35% more inspections per shift now that reporting is automatic
Cost savings
- Rework caused by transcription or misrouted-report errors reduced by ~30%
- Estimated $40,000–$60,000 in annual savings from reduced rework and printing costs
- Solution cost recovered within an estimated 6–8 months
User experience
- 90% of inspectors adopted Inspection Digitalisation within the first month — no parallel paper process
- Onboarding takes under 1 day, since the workflow mirrors how inspectors already mark up drawings
- Reports reach the right hands in under 5 minutes instead of the same or next day
Technology & delivery
- iPad
- PDF rendering
- Point-based annotation
- Report automation
- developers
- 2
- separate design phases
- 0
iPad-based tablet application for shop-floor inspectors
In-app PDF rendering with point-based annotation on technical drawings
Structured measurement and deviation entry
Automatic report compilation and routing on inspection completion
UI/UX validated and iterated with real users instead of an upfront design phase

Client testimonial
To meet our iOS and Android development needs, Onix provides us with exceptional resources.
Their technical team increases the efficiency of our entire mobile development team by sharing information and training our in-house developers. Their developers are very experienced, insightful, easy to work with, and communicative.
Justin Zimmerman
Haas · Machinery Manufacturing

See other related projects


USA
Machinery Manufacturing
A tablet workspace connecting CNC operators
directly to the machine control
Device-side workspace for CNC machine operators
A tablet workspace connecting CNC operators directly to the machine control
Services provided:
Onix built an Android workspace that connects to the machine over Ethernet, organizes programs, drawings, and manuals, and sends a program to the control in two taps


USA
Machinery Manufacturing
Holistic solution to streamline
performance and enhance customer
service
Streamlined service and sales platform
Holistic solution to streamline performance and enhance customer service
Services provided:
We created a unified, end-to-end solution for selling, managing, and servicing CNC machines to enhance the customer experience and internal workflow


Israel
Manufacturing
CRM development for CNC machining
parts production company
CRM system for ordering process for CNC
CRM development for CNC machining parts production company
Services provided:
Onix joined the project as a technology partner and an extension of the client’s internal team, helping translate this vision into a reliable, scalable, and secure CRM platform.
Next step
Still relying on paper drawings and manual reports for quality inspection?
Talk to Onix about a free Quality Inspection Digitization Assessment — we'll map your current inspection flow and show exactly where a tablet-based workflow like HAAS's can remove manual steps, without disrupting how your inspectors already work.








